You may be thinking what has a 3d printed pen got anything to do with carving foam? How to make a wall plaque using a 3D printer Pen. First carve the wall plaque in XPS foam or eps foam. Paint the xpsfoam wall plaque, sand and smooth the surface. Seal the surface of the plaque […]
Carved xps foam skull from a block of xpsfoam 200mmx200mmx150mm. Mostly Carved with a scalpel then sanded down. One coat of matt black paint. Next step would probably make a latex mould and cast it in a resin concrete.
The method on this video is quit inspiring and works very well for making pawns for chess. This method would also work for making a pattern that could be used to make a mould to make a concrete cast garden bird feeder.
Abstract art panel in profile cut layers, red dominant. made from XPS Foam glued together layers and painted with acrylic paint.
Abstract art panels using xps foam panels in layers to make 3d art panels. Each layer was cut and then the surface was smoothed with wet and dry 180 grit sand paper, sealed with water proof PVA and painted with vinyl matt emulsion before gluing together with contact adhesive. The edge of the panel was […]
XPS Foam profile cut shapes. Not the good person to make as profile cut xps foam shape of but some idiots seem to like him.
A simple design using xps foam panel carved with a scalpel into a series of curved lines creating a chisel effect into the foam. The material was then textured painted with coloured stone effect paint from https://www.stonelux.co.uk/ The back of the panel also requires painting with the same material stabilise the material and stop any […]
How to make 3D wall art out of xps foam. Creating 3D wall art from XPS (extruded polystyrene) foam is an accessible and lightweight DIY project that allows for significant creative freedom. XPS foam, commonly found in hardware stores as insulation board, is ideal for carving and shaping due to its uniform, dense structure. The […]
Painting Extruded Polystyrene (XPS) foam using only water-based paints is a simple and effective technique for achieving a finished look for projects without the need for a separate primer or sealer. This method is crucial because the foam is highly susceptible to chemical damage from the solvents found in typical oil-based paints and aerosol sprays, […]